Crestron Smart Timer
Intro PriceCrestron SIMPL+ countdown and count-up timer with up to five staged warnings, a completion trigger and an activity restart: presentation timers, room shut-down countdowns and touch-panel inactivity lock-outs. No device needed.
Screenshots
Overview
Count down from a duration to zero or count up to a target, with Start, Pause, Resume and Reset. An Activity input resets and restarts the timer in one step: wire every panel press to it and the timer starts over on each touch, which makes an inactivity lock-out or an automatic shut-down one symbol. Up to five warning stages, each with its own threshold that can be changed while the program runs, fire once per run, and a completion trigger fires at the target. Each trigger is a pulse of 50 to 5000 ms or latched until Reset, with an optional automatic reset after completion.
The time is shown as HH:MM:SS (remaining or elapsed), with elapsed and remaining seconds, progress for a gauge and a percentage that follow the clock (in a countdown they fall to zero), and one output per state (Idle, Running, Paused, Completed) to gate panel buttons. Timing comes from the processor's clock, not from program passes, so a run does not drift, and a pause keeps the part-second. Use one symbol per timer; a program can run as many as it needs.
The download includes the SIMPL+ module (.usp and .ush), a sample SIMPL Windows program, an HTML5 touch panel, a join reference and the manual. Built for 3-Series and 4-Series processors. A 30-minute trial runs on every program start, and activation uses an offline code, so the processor needs no internet connection.
Features
A countdown and count-up timer for your Crestron program with up to five staged warning triggers, a completion trigger and an activity restart: presentation timers, room shut-down countdowns, session clocks and touch-panel inactivity lock-outs. It is the Crestron port of the AchKayEm Smart Timer plugin for Q-SYS, control for control. A SIMPL+ module with no device behind it: nothing to connect, nothing to configure outside the program.
Timer
- Count Down from a duration to zero, or Count Up from zero to a target (or without one).
- Start, Pause, Resume, Reset, and an Activity input that resets and restarts in one step - wire every panel press to it and the timer starts over on each touch.
- Duration as hours, minutes and seconds (0-99, 0-59, 0-59) with step inputs and echoes for the panel; a design-time default used while the fields are 0.
- Several timers in one program: one symbol each.
Warnings and triggers
- Up to five stages, each armed by its own enable input, with an HH:MM:SS threshold adjustable while the program runs; each fires once per run on the second its threshold is reached.
- Default thresholds spread evenly across the default duration.
- Completion trigger at the target.
- Every trigger a pulse of 50 to 5000 ms, or latched until Reset.
- Optional automatic reset after completion.
Display and feedback
Time$as HH:MM:SS (remaining or elapsed), elapsed and remaining seconds, progress 0-65535 for a gauge and 0-100 as a percent, followingTime$: in Count Down it falls from full to 0, in Count Up it rises.- One output per state (Idle, Running, Paused, Completed) and the state as text, to gate panel buttons.
- Status and diagnostics on the module's own signals.
Timing
- From the processor's clock, not from program passes: one second step per second of real time, the remainder kept across a Pause, so a run is designed not to gain or lose.
Licensing
- 30-minute trial on every program start; no code needed to evaluate.
- Activation with an offline activation code from the AchKayEm licensing portal. The processor needs no internet connection.
- After the trial, only starting a run is refused: a run in progress completes, and Pause, Reset and every setting keep working.
- The license is stored on the processor and checked again on every start (that it survives a reboot, and a change of program, is still to be confirmed on a processor).
Requirements. A Crestron control system programmed in SIMPL Windows; the module is built for 3-Series and 4-Series (compiled for both; run on a 4-Series processor, an RMC4; not yet run on a 3-Series).
Version history
- Initial Release
