Crestron DMX Art-Net Lighting Driver
✨ New🚀 Early AccessCrestron SIMPL+ module that controls DMX lighting through an Art-Net node: 512 channels per universe, 16 scenes with fades, blackout and hold, over the local network.
🚀 Early Access: an untested release. It may have bugs or missing features and will change before 1.0. Sales are final. Your license includes 1.0 and every later update.
Screenshots
Overview
Set channel levels on Crestron's analog range or in 8-bit mode, set a run of channels (a fixture) to one value in one step, and black out, with an optional fade, without losing the levels. Hold freezes the output while levels change behind it. Sixteen scenes store the current levels and recall them with a fade time of your choice; they are kept in the processor's non-volatile memory, so they survive a program restart and a reboot.
Feedback shows each channel's level as commanded, the blackout, hold and fade states, which scene slots hold a scene, and whether the node has been seen and lists this universe, with its name and address. The universe is re-sent every 900 ms as the Art-Net specification asks, changes go out at once under an adjustable rate limit, and the module recovers its socket by itself after a send failure.
The download includes the SIMPL+ module (.usp and .ush), a sample SIMPL Windows program, an HTML5 touch panel, a join reference and the manual. Built for 3-Series and 4-Series processors. Unicast UDP on port 6454; nothing leaves the site. A 30-minute trial runs on every program start, and activation uses an offline code, so the processor needs no internet connection.
Features
A SIMPL+ module that controls DMX lighting through an Art-Net node, as an Art-Net 4 controller on your local network. One module drives one universe of up to 512 channels on one node; add a module per universe. It is compiled into your SIMPL Windows program like any other module and exposes ordinary digital, analog and serial signals.
Control
- 512 channel level inputs: 0-65535 (Crestron's analog range) or 0-255 in 8-bit mode.
- Set a run of channels (a fixture) to one value in one step.
- Blackout on, off, toggle - with an optional fade - without losing the levels.
- Hold: freeze the output while levels are changed behind it.
- 16 scenes: store the current levels, recall with a fade time of your choice. Scenes are kept in the processor's non-volatile memory: they survived a program restart and a reboot on an RMC4. Loading a program whose non-volatile memory is laid out differently makes the processor clear that memory, and the scenes can be lost with it: store them again after such a load.
- Send now, poll now.
- Channels above
Channel_Countstay at zero, including in recalled scenes.
Feedback
- The level of every channel, as the module commanded it.
- Blackout, hold and fading states, and which scene slots hold a scene.
- Node seen and node subscribed (the node lists this universe), with the node's name and address.
Connection
- Local network only: unicast UDP to the node, port 6454. Nothing leaves the site.
- Re-sends the universe every 900 ms, as the Art-Net specification asks (800-1000 ms); sends changes at once, at an average of no more than 40 packets a second (adjustable, 1-44). The module's clock works in 10 ms steps, so gaps are whole steps (20 and 30 ms at 40), and a slow loop (passes of 21-25 ms or more) delivers less than the setting; never more.
- If the socket cannot be enabled or sends fail three times in a row, the module re-enables it after 5 seconds and keeps trying; no operator action is needed.
- Diagnostics on the module's own signals: status, last packet, last reply, last error, packet counters.
Licensing
- 30-minute trial on every program start; no code needed to evaluate.
- Activation with an offline activation code from the AchKayEm licensing portal. The processor needs no internet connection.
- The license is stored on the processor and checked again on every start. The shared licensing code this module carries passed its bench tests on an RMC4 (in another HKM module); this module's own licensing rows have not been run there.
Requirements. An Art-Net node (Art-Net 3 or 4, 15-bit Port-Address) with a fixed IP address on the processor's network; a Crestron processor programmed with SIMPL Windows. The module is compiled for both 3-Series and 4-Series. Version 0.4.10 ran on a 4-Series processor (an RMC4) against an Art-Net node emulator; not yet run on a 3-Series or with a real node.
Version history
Beta Pre-release
