Crestron NovaStar COEX Series
✨ New🚀 Early AccessCrestron SIMPL+ module for NovaStar COEX Series LED controllers: display mode (normal, blackout, freeze), preset recall, brightness, gamma and colour temperature, with status read back over the controller's HTTP API.
🚀 Early Access: an untested release. It may have bugs or missing features and will change before 1.0. Sales are final. Your license includes 1.0 and every later update.
Screenshots
Overview
Switch the display between normal, blackout and freeze, with a toggle for each; recall presets from 16 buttons or any number from 1 to 50; and set brightness, gamma and colour temperature where the controller supports them (NovaStar documents these for the MX6000 Pro). Identify turns on the controller's mapping display, and a raw request input reaches the rest of NovaStar's API.
Feedback reads the display mode and picture values back from the controller where it answers those reads, along with the controller's own preset names, its name, model, firmware, serial number and MAC address, board temperature and voltage, fan speeds and input signal presence. A refused command is reported by name and never drops the connection, and every read is optional, so a controller that refuses one stays connected.
The download includes the SIMPL+ module (.usp and .ush), a sample SIMPL Windows program, an HTML5 touch panel, a join reference and the manual. Built for 3-Series and 4-Series processors. Input switching is not in this release (a preset saved with its source changes the input), and NovaStar documents no power command. A 30-minute trial runs on every program start, and activation uses an offline code, so the processor needs no internet connection.
Features
A SIMPL+ module for NovaStar COEX Series LED video wall controllers: blackout, freeze and normal display, preset recall, and brightness, gamma and colour temperature (documented by NovaStar for the MX6000 Pro only), with the controller's own feedback where it can be read. It speaks the controller's HTTP API, JSON over TCP port 8001. One module per controller; it controls the first screen the controller lists.
Not yet tested on any NovaStar controller. This module has not yet exchanged a message with a COEX controller: every command is sent as NovaStar's API documents describe it, except where a controller has shown them wrong (the display mode is read back as it is set, since 0.1.6). NovaStar's documents name the CX80 Pro, CX40 Pro, MX40 Pro, KU20 and MX6000 Pro (the online pages print the last as the model tag MX6000). Display mode and presets are documented by NovaStar for all COEX controllers; brightness, gamma and colour temperature and their read-back for the MX6000 Pro; nothing here has been tested on a controller.
Input switching is not in this release. NovaStar documents two different commands for it and neither could be tested. Meanwhile a preset changes the input if it was saved with its source (a NovaStar preset records whether it includes the source), and the raw request input can send either of NovaStar's commands. NovaStar's API documents describe no power command.
Control
- Display mode: normal, blackout, freeze, and a blackout and a freeze toggle
- Presets: 16 preset buttons, or any preset number from 1 to 50 from an analog
- Brightness (0 to 100), gamma and colour temperature (documented by NovaStar for the MX6000 Pro)
- Identify (the controller's Mapping function) on and off
- A raw request input for other GET, PUT and POST requests of NovaStar's API, up to 255 characters each; the first 250 characters of the answer are shown
Feedback
- Display mode, brightness, gamma and colour temperature: read from the controller where it answers those reads, and otherwise the values this module set and the controller accepted, with a signal for each read saying which
- The controller's own preset names, by preset number; the last preset this module recalled; the preset the controller marks as selected (unverified)
- Controller name, model ID, firmware, serial number and MAC address
- Main board temperature and voltage, fan speeds, and a hardware alarm (unverified)
- Input connector count, signal presence, and the first input with a signal (not the input on screen)
- Every read is optional: a read the controller refuses is set aside, and the module stays connected
Connection
- Local network only. Plain HTTP: NovaStar's API documents describe no encryption and no login.
- One request per connection: there is no lasting connection to lose. The module counts the controller as connected from its first answer the module understands, and as lost after 3 requests in a row get no answer; it keeps asking, and is connected again at the next answer.
- A command the controller refuses is reported by name and never drops the connection. Commands still waiting when the connection is lost are discarded, not sent late.
- Diagnostics on the module's own signals: connection status, last command, last response, last error, and traffic counters.
Licensing
- 30-minute trial on every program start; no code needed to evaluate.
- Activation with an offline activation code from the AchKayEm licensing portal. The processor needs no internet connection. A code is issued for one control processor: give its MAC address when you ask for the code, and wire a Console symbol if the module is to check it (without one the module accepts the code on any processor).
- The license is meant to be stored on the processor and checked again on every start; storage on a processor is still to be confirmed.
Requirements. A NovaStar COEX Series controller with a fixed address, reachable from the processor on TCP port 8001, and not held by NovaStar's VMP software; the numbers of the presets to recall. A Crestron control system programmed in SIMPL Windows; the module is built for 3-Series and 4-Series (compiled for both; run on a 4-Series processor, an RMC4, against an emulator; not yet run on a 3-Series).
Version history
Beta Pre-release
